Products
The OutBack Power Technologies FLEXware PV combiner series sets the new standard for PV balance-of-system hardware. Ideal for both small or large systems, the FLEXware PV8 and FLEXware PV12 accommodates the overcurrent protection requirements of your application. From 150VDC breakers for low voltage PV systems, to 600VDC fuse holders for high voltage PV systems, the FLEXware PV Combiner series handles it all.
Designed to survive in outdoor environments, the rainproof, UL type 3R powder coated aluminum chassis can be mounted on a wall, sloped roof or pole. The unique angled negative terminal bus bar design makes wiring fast and easy without the larger output conductors blocking access to the smaller input terminals. Dual output lug terminals are included for up to 2/0 AWG conductors. The tinted flame-retardant polycarbonate deadfront panel creates a clean appearance while preventing accidental contact with the live terminals and is easily removable during installation.
The FLEXware PV Combiner makes it easy to take your installation to the next level.
Holds up to eight OutBack Power Technologies DIN mounted breakers for PV array configurations of 12 to 72 VDC systems with a maximum open circuit voltage of 150 VDC or use six OutBack Power Technologies OBFH "touch safe" type fuse holders for high voltage systems with a maximum open circuit voltage of 600 VDC
Holds up to twelve OutBack Power Technologies DIN mounted breakers for PV array configurations of 12 to 72 VDC systems with a maximum open circuit voltage of 150 VDC or use eight OutBack Power Technologies OBFH "touch safe" type fuse holders for high voltage systems with a maximum open circuit voltage of 600 VDC
Model:FLEXware PV
Description: Outdoor rated powder-coated aluminum PV array combiner box
Includes: Enclosure, dual combining bus bars, one terminal bus bar, two #1/0 AWG set-screw compression type box lug terminals and one #1/0 AWG ground lug
| FWPV-8 | FWPV-12 | |
|---|---|---|
| Enclosure Material | Powder coated aluminum with stainless steel hardware | Powder coated aluminum with stainless steel hardware |
| Mounting Options | Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch) | Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch) |
| Enclosure Rating | Outdoor Rainproof, UL Type 3R | Outdoor Rainproof, UL Type 3R |
| Enclosure Security | Padlock hole in chassis and cover for up to 3/8 inch pad lock | Padlock hole in chassis and cover for up to 3/8 inch pad lock |
| Output Terminals | #14 - 2/0 AWG (2.08 - 67.43 mm2) Two box lug terminals included | #14 - 2/0 AWG (2.08 - 67.43 mm2) Two box lug terminals included |
| Number of separate circuits | One Circuit | One or Two Circuits |
| Number of 150VDC breakers | up to 8 | up to 12 (two groups of six) |
| Number of 600VDC fuse holders | up to 6 | up to 8 (two groups of four) |
| Input Terminal | 150VDC Breakers / #14 - 6 AWG (2.08 - 13.3 mm2) 600VDC Fuse / #14 - 10 AWG (2.08 - 5.26 mm2) | 150VDC Breakers / #14 - 6 AWG (2.08 - 13.3 mm2) 600VDC Fuse / #14 - 10 AWG (2.08 - 5.26 mm2) |
| DimensionsUnit (H x W x D) Shipping (H x W x L) |
15.2 x 9.2 x 3.9" (38.7 x 23.3 x 9.9 cm) 4.3 x 13 x 19" (10.9 x 24.1 x 48.3 cm) |
15.2 x 12.7 x 3.9" (38.7 x 32.2 x 9.9 cm) 4.3 x 9.5 x 19" (10.9 x 24.1 x 48.3 cm) |
| WeightUnit Shipping |
4.4 lbs (2.0 kg) 5.5 lbs (2.5 kg) |
5.9 lbs (2.7 kg) 7.4 lbs (3.3 kg) |
OutBack DC DIN Mount Breakers
DIN rail mount breakers are hydraulic-magnetic type and are not affected by high ambient temperatures.
| Model | Current Rating | Voltage Rating* | Terminals | Width |
|---|---|---|---|---|
| OBB-1-125VDC-DIN | 1 Amp | 125VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-2-150VDC-DIN | 2 Amp | 150VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-3-150VDC-DIN | 3 Amp | 150VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-4-150VDC-DIN | 4 Amp | 150VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-5-150VDC-DIN | 5 Amp | 150VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-6-150VDC-DIN | 6 Amp | 150VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-8-150VDC-DIN | 8 Amp | 150VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-9-150VDC-DIN | 9 Amp | 150VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-8-150VDC-DIN | 8 Amp | 150VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-10-150VDC-DIN | 10 Amp | 150VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-15-150VDC-DIN | 15 Amp | 150VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-20-150VDC-DIN | 20 Amp | 125VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-30-125VDC-DIN | 30 Amp | 150VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-50-150VDC-DIN | 50 Amp | 125VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
| OBB-60-125VDC-DIN | 60 Amp | 150VDC | #14 to 2 AWG clamp terminals | 0.5" (13 mm) |
* Approved for maximum VOC of 15O VDC by ETL for PV array applications only.
OutBack High Voltage DIN Mount Fuse Holders and Fuses
Fuse holders are DIN rail mount with #8 AWG set-screw type compression terminals. Touch-safe design and not rated for load make or load break usage. Maximum of eight fuseholders in one PSPV enclosure.
| Model | Description | Current Rating | Voltage Rating | Width |
|---|---|---|---|---|
| OBF-6-600VDC | Fuse | 6 Amp | 600VDC | N/A |
| OBF-10-600VDC | Fuse | 10 Amp | 600VDC | N/A |
| OBF-15-600VDC | Fuse | 15 Amp | 600VDC | N/A |
| OBFH-30-600VDC-DIN | Fuse Holder | 30 Amp | 600VDC | 0.7 " (18 mm) |
Terminal Bus Bars
Used for adding more wire terminations or for isolating multiple positive/negative circuits. All TBB models have three #1/0 to 14 AWG and eight #6 to 14 AWG screw type compression terminals, which means no ring lugs are required. Available with black, white, red, blue and brown insulators. All required TBBs are included with the AC Input-Output-Bypass Assemblies.
| Model | Description | Terminals |
|---|---|---|
| TBB-GROUND | Ground/Neutral terminal bus bar and mounting screws (no insulators) | Three #1/0 to 14 AWG and Eight #6 to 14 AWG screw type compression |
| TBB-BLACK | Bus bar with black insulators and mounting screws | Three #1/0 to 14 AWG and Eight #6 to 14 AWG screw type compression terminals |
| TBB-BLUE | Bus bar with blue insulators and mounting screws | Three #1/0 to 14 AWG and Eight #6 to 14 AWG screw type compression terminals |
| TBB-RED | Bus bar with red insulators and mounting screws | Three #1/0 to 14 AWG and Eight #6 to 14 AWG screw type compression terminals |
| TBB-WHITE | Bus bar with white insulators and mounting screws | Three #1/0 to 14 AWG and Eight #6 to 14 AWG screw type compression terminals |
| TBB-BROWN | Bus bar with brown insulators and mounting screws | Three #1/0 to 14 AWG and Eight #6 to 14 AWG screw type compression terminals |
Spotlight
Latest News:
We Want to Hear from You! We are asking for your help in planning the next generation of energy storage products and systems. Click here for more information.
Upcoming WEBINARS: Click here to register and learn about OutBack Power’s new EnergyCell RE VRLA battery and Integrated Battery Rack
First Radian Series Inverter/Charger Shipped and First User Sees Marked Performance Improvement!
Click here for the full story.
Online Forum
