PWM Charge Controller
  • Part Number: Model: SCCP10-050
  • Product Line: Controllers
  • Related Categories: SmartHarvest
SCCP10-050 Charge Controller

Product Highlights

  • 10A/50V Pulse-Width Modulation (PWM) charge controller for specific charging applications
  • PWM technology for the right balance between economy and performance
  • Integrated LED display
  • Backed by OutBack Power's global sales and support network

  • Description

    The most cost effective option for integrating energy storage into PV system design.

    With the goal of making an elegant, proven system power electronics type even better, SmartHarvest has elevated the PWM baseline with its SCCP charge controllers to give every system the benefits of both high-efficiency and economy.  PWM charge controllers use advanced digital signal processing to anticipate battery charging needs and affect the right amount of control.

    The SCCP10-050 is an excellent choice for smaller systems operating under consistent solar conditions where utilizing an economical PWM technology helps to allocate more of the system bedget to energy-producing components such as additional panels.  The SCCP10-050 is not only the right tool for the job, but the right investment over the life of the system through dependable, long-term performance engineering by SmartHarvest.

    Please note SmartHarvest by OutBack products are not designed for connection with OutBack communication devices. For more information on product capability, please contact sales or technical support.

    Technical Specifications

    •  SmartHarvest SCCP10-050 Specifications
      Maximum Output Current (I) 10
      Nominal Battery Voltages 12/24
      Input Panel Power (Wp) 120/240
      Panel Intelligence PWM
      Maximum Input Voltage (Voc) 25/50
      Charging Regulation Four stages: bulk, absorb, float and equalization
      Bulk Voltage (VDC) Flooded: 14.8/29.6 VRLA: 14.6/29.2 
      Absorb Voltage (VDC) Flooded: 14.8/29.6 VRLA: 14.4/28.8 
      Absorb Time 2 hours 
      Float Voltage (VDC) Flooded: 13.2/26.4 VRLA: 13.5/27.0 

      Equalization Voltage (VDC)
      (Flooded Batteries Only)

      Flooded: 15.5/31.0 

      Equlaization Time

      1 hour 

      State of Charge Low Voltage
      Disconnect (V)


      Low Battery Load Reconnect (VDC)


      High Battery Load Disconnect (VDC)

      Temperature Compensation -5mV/°C
      Battery Type Selection
      VRLA/Flooded—selectable via jumper.  Factory default VRLA (jumper inserted)
      Data Logging Available with monitoring software.
      Standby Current (mA) 6.8
      Display 3 LEDs
      IP Class IP20
      Operating Temperature Range -40° to 60° C
      Humidity 0-95% RH non-condensing
      Dimensions HxWxD (in/cm) 2.6x6.3x1.0 / 6.8x15.9x2.5
      Weight (lb/kg) .39 / .18 
      Certifications CE, IEC/EN 62109-1
      Warranty Standard 2 year