Inverter Charger not working

A place where users can meetup with other FlexPower One users and can find support for one another. A great place for people who have not purchased the FlexPower One yet to look up information.

Inverter Charger not working

Postby Grace Island on Sat Jan 13, 2018 3:53 am

We're experiencing a power failure. The system won't recognise gen input to charge batteries, and is not inverting 48v>240v) either The LEDs on the inverter/charger are not illuminated . The mate 3 is showing battery at 47.9v.

I can't seem to find anything in trouble shooting. Can anyone help?
Grace Island
Junior Member
 
Posts: 1
Joined: Sat Jan 13, 2018 3:35 am
My RE system: Flex power One

Re: Inverter Charger not working

Postby sparksalot on Sat Jan 13, 2018 8:15 pm

Are you in the Philippines?

Is it a VFX or VFXR inverter?

What is your generator? Is it a Inverter Generator? Is it a 60Hz generator?

Did generator ever work with FlexPower One prior to this power failure?

Does your generator go through a Transfer Switch? Is there 220 VAC coming out of Transfer Switch and going into the Inverter AC Input L1 & L2 terminals?

No LED lights means "NO AC" present, so your generator must be the trouble. A VFXR Inverter has a setting in the Mate3 for lower quality generator output, while the VFX does NOT, and then must have the higher quality AC of a Inverter Generator.
sparksalot
OutBack Guru
 
Posts: 111
Joined: Sun Jul 17, 2016 5:31 am
My RE system: FLEXpower TWO VFXR3648A Grid-Tied and Battery Backup Hybrid

Traction battery FLA 48 volt 805Ahr.

30 SolarWorld 245w mono


Return to Flex Power One

Who is online

Users browsing this forum: No registered users and 2 guests