red warning light blinking on both inverters

Discussion about OutBack Inverters in Backup Applications

Moderators: OutBack Moderator Team, OutBack

red warning light blinking on both inverters

Postby FREDLO69 on Mon Feb 08, 2016 6:55 pm

AC input too high warning light on both inverters GVFX3648. I have been running fine for about 3 years and today I have this issue. System will not invert or sell, ac passes through only. 30 x 255 solarworld panels, mate, hub, 2 mx80 CC. Never had this issue before. Hope someone has a solution. Went over mate settings several times, turned system off completely and same issue. Thank in advance.
FREDLO69
Forum Member
 
Posts: 6
Joined: Thu Jun 06, 2013 4:41 pm
My RE system: flex power 2

Re: red warning light blinking on both inverters

Postby SandyP on Mon Feb 08, 2016 7:05 pm

FREDLO69 wrote:AC input too high warning light on both inverters GVFX3648.


Have you got a way to check what the Grid AC voltage is coming into your system?
Sounds like your power supplier/utility may have an issue with their power.
SandyP
Forum Guru
 
Posts: 253
Joined: Tue Jun 21, 2011 4:44 am
Location: Victoria, Australia
My RE system: 8 x 190W 24V Suntech panels (4 strings of 2)
Mate2
Outback FM60 MPPT
12 x 2V Hoppecke GEL 660 Ah C100 - 24V System
Outback VFX3024 Inverter/Charger
Victron BMV-602s
Honda 5.5kW Genset

Re: red warning light blinking on both inverters

Postby FREDLO69 on Mon Feb 08, 2016 7:13 pm

It fluctuates between 127 volts and 131 volts.
FREDLO69
Forum Member
 
Posts: 6
Joined: Thu Jun 06, 2013 4:41 pm
My RE system: flex power 2


Return to Backup Applications

Who is online

Users browsing this forum: No registered users and 3 guests