I need help

General Talk

Moderators: OutBack, OutBack Moderator Team

Post Reply
Jpgagnon
Forum Member
Posts: 22
Joined: Thu Jul 23, 2020 6:03 am

I need help

Post by Jpgagnon » Sat Aug 15, 2020 5:43 pm

hello I would like to know how I can see the total input ampere on my Mate3s of my 2 fx80s without having to change the port to see each independent controller with my mate2 I still had the total input Amps for the 2 together

sodamo
Forum Czar
Posts: 843
Joined: Mon Apr 03, 2006 1:55 am
My RE system: Totally off grid - Hamakua side, Big Island, Hi

36 Trina 280 & 16 Phono 250 in 48 volt array (fixed) 14080w
Radians GG8048/GS4048 w GSLCs
4 FM 80 charge controllers
Hub 10.3
FNDC w/3 shunts
Mate 3s
OpticsRE - MMKL - Ninole Hi
12 SimpliPhi 3.8
14Kw Kohler 14RESA Propane

Charging Only
2FX3048T
Hub
FNDC. - shared shunt feeds from Radian FNDC
Mate 3s
10Kw MEP 803a Military gen

Honda EU7000i

Davis VantagePro2 Wx Station
On line at: https://www.wunderground.com/dashboard/pws/KHININOL2
Location: Ninole, Hi

Re: I need help

Post by sodamo » Sun Aug 16, 2020 1:17 am

OpticsRE will show you.
David
Please visit http://vacation.ninolehawaii.com

Jpgagnon
Forum Member
Posts: 22
Joined: Thu Jul 23, 2020 6:03 am

Re: I need help

Post by Jpgagnon » Sun Aug 16, 2020 4:11 am

I don't have internet at the camp there must surely be some way to see the 2 controllers at the same time on the Mate3s if the mate2 does!

Mike Curran
Forum Emperor
Posts: 1804
Joined: Sat Aug 28, 2004 6:28 pm
My RE system: Outback - Garage roof:
- 8 (2x4) Evergreen 180's into one FM80 (2007/2020 - replaced MX60)
- 6 (2×3) ALEO S79-300's into one FM80 (2017)
- 2 grid-tied GVFX3524's classic stacked for 120/240VAC (2007)
- 12 Surrette/Rolls 2V x 1766Ah (2007)
- Hub10.3, Mate3s, FNDC, RTS, OpticsRE. Tigo Energy ES maximizers on each PV module.

Westinghouse Solar - Barn roof: (2012)
- 30 (2x15) 235W panels with Enphase M215 microinverters, grid-tied

Outback Skybox - Barn roof: (2019)
- 14 Talesun 275W in series (DC array input to SB inverter/charger)
- 3 SimpliPhi 3.8 batteries, 48V, 225Ah total
- AC coupled input (manual switch during grid outage only) from 14 Talesun 275W,
Enphase M215 microinverters, normally direct grid tied

All self-designed and self-installed
Location: Chagrin Falls, Ohio

Re: I need help

Post by Mike Curran » Sun Aug 16, 2020 9:26 am

If you have a FlexnetDC with a shunt measuring the total charge current from your CC's then you can see the total current on the Mate3s by pressing the button below the battery icon. On the attached photo the top line "IN" shows total current.
https://drive.google.com/file/d/10qxCE9 ... p=drivesdk
http://www.tigoenergy.com/site.php?95b2dca2-ca6c
https://enlighten.enphaseenergy.com/public/systems/Hctc107221

Post Reply